RICHIEDI LA BROCHURE!

Cutting and Working Centre

CNC cutting and machining centre with multiple controlled axes dedicated to window and door manufacturers requiring even higher productivity levels (up to 500 frames / 8h*).

 

The system consists of an automatic bar loading magazine that feeds, by means of a double CNC gripper to speed up bar loading without downtime, a work module that houses 2 dual High Speed spindles, in the standard configuration, working completely independently of each other, and a cutting module with 3 independent and synchronised blades.

The ultimate expression of mechanical and technological innovation, it performs machining and cutting of the highest precision and speed, while maintaining reliability and efficiency over time.

* It depends on machining, the type of profile used and the machine configuration.


5 reasons to choose the Fab Cut 3B RS

V Speed of execution further improved: : Extreme processing speed is achieved by overlapping multiple machining operations and the elimination of all downtime.
High adaptability to profiles with special section sizes.

Optimise production lists: Fewer bars used thanks to GRAF Synergy software.

Maximum precision over time: Automatic profile alignment system (linearises bars that are not perfectly straight) and CNC profile clamp with actual position reading via centesimal magnetic strip.

User Friendly Technology: Intuitive software for managing work cycles.

The Fab Cut 3B RS is equipped with modern production list management software that allows automatic import of cutting lists and enables optimisation of the number of bars to be used while keeping track of the machine's operation.

An automatic profile alignment system is also installed on the machine, which, in the event that the bar is not perfectly straight, linearises it, allowing for optimum workpiece machining accuracy.

Dimensions

  • Length (A)

    16.400 mm

  • Width (B)

    4.300 mm

  • Height (C)

    2.600 mm

  • Weight

    10.000 Kg

Details

  • Power Installed

    34 Kw

  • Power supply

    400 V

  • Air Consumption

    250 Nl/min

  • Min. Exercise Pressure

    7 bar

Cutting Module

Structure

1 3-Blade Cutting Module Ø 550 mm with high precision cutting of PVC profiles even with gasket.

Horizontal movement.

 

Preps

  •  Cut at -45°/90°/+45°

Working Module

Structure

2 High Speed twin-shaft rotating spindles on two independent carriages (on 3 controlled axes) capable of simultaneous machining operations completely independent of each other.

Preps

  • Condensation Drain Holes
  • Handle Holes / Cylinder 
  • Holes
  • Holes Hinge
  • Aeration holes
  • Slot for lock
  • Striker marking
  • Any other machining required on PVC profiles

Performances

Up to 500 frames / 8h*

* It depends on the processes, type of profile used and machine configuration.

  • Operators

    1

Automatically Loadable Profile Dimensions

  • Length

    500 / 6.500 mm

  • Width

    40 / 130 mm

  • Height

    40 / 120 mm

Loading Module

  • Loading warehouse with max. capacity of 8 bars.
  • Automatic bar loading system using straps.
  • Double CNC profile gripper each with 2 controlled axes driven by a linear motor with prismatic guides with position reading on centesimal magnetic strip.

Unloading Module

  • Automatic extractor of profiles cut on a controlled axis.
  • Strap unloading table with safety photocell.
  • Max. capacity of exhaust 10 pieces.

On request the system can be equipped with:

  • Configuration with 1 additional Spindle.
  • Opz. Recover: It allows you to reinsert pieces to be recovered following production errors into the cutting list (a new cutting list optimized for them).
  • Fly Optimizer: Sistema di misurazione automatico resti barra (consente di ottimizzare nuovamente la lista di produzione per riutilizzare gli avanzi di produzione).
  • Options: cabina insonorizzata, aspirazione, NRT scarico trucioli lavorazione
  • Exhauster with 2 bags.
  • Manual labeling machine.
  • Labeling machine with automatic label applicator.
  • STATS: Software for the analysis of production data (reports the timing of daily, weekly, monthly and annual operations).
  • Creation of customized solutions for machine adaptation to profiles with particular shapes (technical analysis required).
  • Possibility of preparation for automatic connection to a dynamic table, ESU reinforcement screwing bridge, EDU wall fixing drilling bridge, 1 or 2 RMA striker assembly centres.
  • Chip conveyor - 1,000 or 2,000 mm version.
  • Customized soundproof cabin.
  • Single or double laser for profile marking.
ASK FOR INFORMATION HERE
TOP